13
7
2
3
4, 5, 6
5 Lower looper thread guide (1)
6 Lower looper thread guide (2)
2 Top cover thread guide
7, 8
7 Looper thread take-up lever (lower)
8 Lower looper thread guide (3)
3 Thread tension unit
2
3
4
5
2 Slide the thread under the top cover thread
guide second from the right side, as illustrated.
3 Hold the thread at both ends and tug gently
to ensure the thread is correctly inserted in
the thread tension unit.
4 Pass the thread through the center of the
looper thread guide, as illustrated.
4 Looper thread guide
5, 6
Pass the thread through the two lower looper
thread guides, as shown.
7 Pass the thread through the looper thread
take-up lever (lower).
8 Pass the thread through the lower looper
thread guide (3), as illustrated.
6
8
To Next Page
Loading...
