Janome CompuLock - Thread Tension (Double Chain)

45
Thread Tension (Double Chain)
Adjusting the thread tension may be required
depending on the type of fabric and thread
being used.
To begin with, select the stitch pattern key
and sew a test piece.
If the tension balance on the test piece is not
satisfactory, you can adjust the thread ten-
sion manually, as follows;
Correct tension
1 Wrong side of fabric
2 Right side of fabric
3 Left needle thread
4 Double chain looper thread
5 Left needle thread tension
6 Double chain looper thread tension
Wrong tension
The illustration shows sewing results when the
left needle thread tension is too loose.
Remedy:
Tighten left needle thread tension.
1
1
4
2
3
4
2
3
6
5
6
5