Janome CompuLock - Threading the Left Needle

20
3
4, 5, 6
7, 8
4 Left needle thread guide
5 Left take-up lever cover
6 Needle thread guide
7 Needle bar thread guide
8 Left needle
3 Thread tension unit
3
4
5
6
7
3 Hold the thread at both ends and tug gently
to ensure the thread is correctly inserted the
thread tension unit.
8
4, 5
Pass the thread below the left needle thread
guide then pull it up and over the left take-up
lever cover.
6 Pass the thread through the needle thread
guide.
7 Raise the needle bar to its highest point by
turning the handwheel toward you, then
go over the needle bar thread guide.
8 Pull out the thread 10 cm (4”) after thread-
ing the left needle.