Janome CompuLock - Manual Adjustment of Thread Tension; Manual Setting, Memory and View for Thread Tension

29
3 Press THREAD key to enter settings for each
thread.
Manual Adjustment of Thread Tension
You can adjust the thread tension by pressing the
+or key to get the desired tension setting.
The actual thread tensions for each thread are
shown above the + / key on the screen.
Memory Key: Memorize the manually set
thread tensions.
Manual Setting, Memory and View for
Thread Tension
Machine setting
You can memorize the number of layers, type
of fabric and type of threads depending on
your needs when setting thread tension manu-
ally.
2 Press FABRIC key to advance to this screen,
then choose the type of fabric you’re using.
Press OK key to memorize or press Return key
to return to previous screen and cancel any
changes.
4 Press LAYERS key to register how many
layers of fabric you’re sewing.
Thread Tension Key: Increase thread tension.
Thread Tension Key: Decrease thread ten-
sion.
3
1
2
3
4
5
6
1
2
4
2
1
3
4
5
1
2
3
4
5
Recall Memory Key: Recall the memorized
manual setting data.
6
7
7
1
2
OK Key: Memorize the settings and re-
turn to
**
MEMO
**
screen.
Return Key: Return to previous screen
and cancel any changes.
Auto Key: Return to automatic thread
tension display screen.
Menu Key: Return to MENU screen.
< >: Indicates the automatic thread tension
setting.
1 Press the Memory key.
3 Cursor Advance Key: Press to move cursor.
4 Cursor: Current setting position.
5 Non-cursor position: Represents another.