21
Threading the Double Chain Looper
Open the looper cover.
Raise the presser foot lifter.
Place the spool of thread on the right
side spool pin.
* The points to thread for the double
chain
looper are marked in orange.
* A convenient threading chart is placed
on the machine body inside the looper
cover.
1
2
1 Draw the thread through the rightmost
thread guide from back to front.
2 Pass the thread through the rightmost
top cover thread guide from the right,
as illustrated.
1
2
3
4
5
6
7
8
9
10-B
11
12
10-A
13
1
2
1 Thread guide
2 Top cover thread guide
To Next Page
Loading...
