Janome CompuLock User Manual

1
IMPORTANT SAFETY INSTRUCTIONS
SECTION 1 PREPARATION
• Names of Parts...................................................................................................... 3
• Attaching the Waste Chip Box............................................................................... 4
• Storing the Accessory Box .................................................................................... 4
• Standard Accessories............................................................................................ 4
SECTION 2 OPERATING INSTRUCTIONS
• Plug in the Machine and Switch on Power............................................................ 5
• To Sew Using Foot Control ................................................................................... 5
• Controlling Sewing Speed ..................................................................................... 5
• How to Turn Handwheel ........................................................................................ 6
• Opening and Closing the Side Cover.................................................................... 6
• Opening and Closing the Looper Cover................................................................ 7
• The Position of Telescoping Thread Guide Bar .................................................... 7
• Attaching the Spool Cap and Net .......................................................................... 8
• Raising or Lowering the Presser Foot................................................................... 8
• Up/Down Needle Position Key .............................................................................. 8
• Screen Sharpness Adjusting Knob ....................................................................... 8
• How to Set the Needles ........................................................................................ 9
• Safety System......................................................................................................10
• Threading the Machine........................................................................................ 10
* Four – Thread Operation ............................................................................... 11
* Threading the Lower Looper .................................................................... 12–14
* Threading the Upper Looper .................................................................... 15–16
* Threading the Right Needle ..................................................................... 17–18
* How to Use Needle Threader ........................................................................ 18
* Threading the Left Needle ....................................................................... 19–20
* Threading the Double Chain Looper........................................................ 21–23
• Changing to Two – or Three – Thread Serging with Spreader ........................... 23
• Visual Touch Screen Operations ................................................................... 24–25
• To Change Screen Language ............................................................................. 24
• Automatic Thread Tension Display Screen ......................................................... 25
• Choose the Needle and Thread......................................................................25
* Check the Needle.........................................................................................25
• Stitch Package .................................................................................................... 26
• Standard Machine Settings for Automatic Thread Tension ................................. 27
• Stitch Pattern with Machine Setting .................................................................... 28
• Manual Adjustment of Thread Tension ................................................................ 29
• Manual Setting, Memory and View for Thread Tension ................................ 29–30
• Stitch Pattern and Threading ........................................................................ 31–35
1. OVERLOCK4 ................................................................................ 31
2. OVERLOCK 3 (STANDARD), OVEREDGE 3 (STANDARD),
ROLLED HEM 3,FLATLOCK 3 (STANDARD), NARROW HEM,
PICOT EDGE ................................................................................ 31
3. OVERLOCK 3 (WIDE), OVEREDGE 3 (WIDE),
FLATLOCK 3 (WIDE) .................................................................... 32

Janome CompuLock Specifications

General

Brand	Janome
Model	CompuLock
Category	Sewing Machine
Language	English