30
(To Memorize Settings)
1 After entering your fabric, thread and layers
settings, press the MEM key to save them.
2 There are three memory locations. Choose
MEM 1, MEM 2 or MEM 3.
(The number of memory locations changes
depending on the type of stitch.)
3 The formerly memorized settings will be
displayed.
4 Press OK key to replace the previous settings
with the new ones, or press the Return key to
cancel.
2
3
4
1
2
1
2 If more than one memory location is being
used, press Page key to advance to them.
(To view Memorized Settings)
1 Press Recall Memory key to view the cu
rently memorized settings.
1 Return key
1
To Next Page
Loading...
