23
Embroidery mode settings
1 Auto thread tension
The auto thread tension level can be adjusted with
the “+” or “–“ key.
2 Low bobbin thread warning
The low bobbin thread warning level can be adjusted
with the “+” or “–“ key.
3 Grid on/off
To show the grid, press the on/off key to check the box.
To hide the grid, press the on/off key again to uncheck
the box.
4 Grid size
The grid size can be changed by pressing the “+” or
“–“ key.
5 Embroidery maximum speed
The maximum sewing speed can be changed from 400
to 800 spm for embroidery sewing by pressing
the “+” or “–“ key.
NOTE:
Reduce the sewing speed when sewing patterns with
narrow zigzag stitches that tend to distort at high speed.
6 Auto thread cutting
The machine will trim the threads and stop automati-
cally to allow you to change the thread to the next color.
7 Thread selection
There are five brands of embroidery thread to choose
from. Press the key of the thread you wish to use. The
color code of the selected brand will be shown on the
color/part key along with the name of the color.
8 Color options
Press the key to select one of the 3 colors for the
pattern selection keys, which will display in the color
shown.
To change the screen background color, press the
key to open the custom color window.
Refer to page 22.
Language Selection (Flag mode)
You can select one of the following 10 languages by
pressing the corresponding key.
1 English 2 French 3 Spanish
4 Italian 5 Dutch 6 German
7 Portuguese 8 Swedish 9 Russian
10 Finnish
Rayon 40
Rayon 40
Polyneon 40
Polyester 40
Poly Sheen
SET1
X
Register
10mm
Auto Tension
Auto
Remaining Bobbin Thread
2
Grid Line
on
off
Grid Size
Language
X
Register
Language Selection
1
2
3
4
5
6
7
9
10
1
2
3
4
5
6
7
8
Basting Trace
8
9
9 Tracing with basting stitches
To enable tracing with basting stitches, press the
key to check the box on.
You can select either tracing without stitching or tracing
with basting stitches if you enable this function.
To Next Page
Loading...
