38
Darning
The MC 11000 automatically darns rips and holes.
Large and small holes can be mended quickly and
easily with this unique stitch.
Select pattern B15.
1. Attach the automatic buttonhole foot R and pull the
button holder all the way out.
To sew
2. Depress the foot control and sew to the required
length, then press the reverse button. The darning
length has now been determined.
Depress the foot control and continue sewing until
the machine stops automatically.
3. Sew another layer of darning over the first layer, at a
right angle to it.
NOTE:
The maximum length of darning is 2 cm (3/4”) and the
maximum width is 0.7 cm (1/4”).
To sew the same size darning
Simply depress the foot control to sew another darning
in the same size.
To sew the next darn in a different size, press the exit
key.
To adjust the evenness of darning stitches:
You can correct the unevenness of darning by pressing
the “–“ or”+” key.
If the left corner is lower than the right side, press the
key to correct it, and vice versa.
4
Buttonholes(B)
6
2
3
5
7
8
9
10
11
12
13
14
15
16
R
17 18 19
20
21
1
Darning
AUTO
Sew to length required,
then press " ".
Adjust
5.0
4.2
OK
Default
9
1
1
2
3
2 cm
0.7 cm
Restart for the same size.
Different size
To Next Page
Loading...
