69
Built-in Designs
Press the Built-in Design Tab.
Press the pattern selection key to select the desired
pattern.
The embroidery screen will appear.
Adjust the hoop position with the jog keys so that the
needle drop position comes right above the center of
the reference lines on the fabric.
1 Jog keys
2 Needle drop position
3 Centerlines
1
Emerald Green 250
18 min
6 Colors
7,052 ST 70x78mm
START
STOP
1 Exit key
Press this key to return to the pattern selection window.
2 Stitch preview key
Press this key to show the stitched image of the
selected design
3 Color/section key
Press this key to show the complete image of the
selected design or partial image of each color sections.
To view the next color section, press the next page
key. Press the previous page key to view the
previous color section.
The machine will automatically stop sewing (and trim
the threads if the auto thread cutting is activated) when
one part of the embroidery design is finished.
Change the thread and start sewing again.
Sewing the specific color/section by skipping
You can sew only the specific color sections of the
design by pressing the next page key until the
desired section is displayed.
2
3
1
1
Emerald Green 250
18 min
6 Colors
7,052 ST 70x78mm
Jog / ST
X
1
12 min
6 Colors
7,052 ST 70x78mm
A Z
Ready to Sew
ST:126x110mm
Auto
2
Powder Blue 229
2/6
01 : Emerald Green 250
02 : Powder Blue 229
03 : Coral 234
04 : Mustard 270
05 : Honey Dew 273
06 : Sunflower 239
1
2
3
4
4 Color list key
Press this key to display a list of thread colors employed
in the selected design.
To Next Page
Loading...
