51
Rolled hemming
This section provides two options of the rolled hem-
ming, one with straight stitch and the other with zigzag
stitch.
Attach the rolled hem foot D.
Fold the fabric edge twice to form a hem, 0.3 cm (1/8”)
wide and 5 cm (2”) long then press.
Place the fabric aligning the hem edge with the guide of
the foot.
Lower the foot and sew several stitches slowly while
pulling on the threads to assist feeding the fabric.
Stop the machine and lower the needle into the fabric.
Raise the foot and insert the folded portion of the fabric
into the curl of the foot.
Lower the foot and sew while lifting the edge of the
fabric to keep it feeding into the curl smoothly and
evenly.
To Next Page
Loading...
