EasyManua.ls Logo

Janome MC 11000 - Patchwork

Janome MC 11000
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
90
60
45
120
1.80
Patchwork
Patchwork piecing
There are 3 stitches for seaming patchwork pieces in
this section.
The default stitch length is set at 1.8 mm, ideal for
patchwork piecing, but you can fine tune the stitch
length by pressing the “+” or “-“ key..
Attach 1/4” foot O, which helps you to keep a constant
1/4” (6 mm) seam allowance.
Put 2 pieces of fabric with right sides together.
Place the patchwork pieces under the foot so that the
edge of the fabric matches the guide on the presser
foot.
You can seam patchwork pieces at the desired angle
without marking, by using the angle scale on the
needle plate.

Table of Contents

Other manuals for Janome MC 11000

Related product manuals