Janome MOD-100 User Manual

32
Round-end and Fine Fabric Buttonhole
q Stitch pattern: 19 and 20
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 2.5 to 5.5.
The stitch density can be varied from 0.2 to 0.8.
4
q
w
e
Keyhole Buttonhole
q Stitch pattern: 21
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 5.5 to 7.0.
The stitch density can be varied from 0.3 to 0.8.
Use the seam ripper and an eyelet punch to open the
buttonhole.
q Eyelet punch (not provided with the machine)
4
q
w
e
q
Stretch Buttonhole
q Stitch pattern: 22
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row rst.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 1.0.
4
q
w
e
Antique Buttonhole
q Stitch pattern: 23
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row rst.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 2.5.
4
q
w
e

Janome MOD-100 Specifications

General

Brand	Janome
Model	MOD-100
Category	Sewing Machine
Language	English