Janome MOD-100 User Manual

37
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
4
q
w
e
Tacking
q Stitch pattern: 26
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
q
w
r
r
e
Start sewing
Start the machine and sew until the machine stops
automatically. The machine will sew a tacking 1.5 cm
(5/8˝ ) long.
q 1.5 cm (5/8˝)
Sewing a shorter tack
To sew a tack shorter than 1.5 cm (5/8˝), rst stop the
machine after sewing the required length, then press the
reverse button.
The tack length has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
w Required length
e Reverse button
r Tack length
Sewing a same-size tacking
Simply start the machine to sew another tack at the same
size.
NOTE:
To reset the size of the tacking, select the other stitch
pattern and reselect the tacking.

Janome MOD-100 Specifications

General

Brand	Janome
Model	MOD-100
Category	Sewing Machine
Language	English