39
Place the right sides of the fabric together.
Attach the zigzag foot and seam up to the end of the
zipper opening, with a 2 cm (13/16˝) seam allowance.
Reverse the stitch to fasten the seam.
Manually increase the stitch length to 5.0 and baste the
zipper opening with the thread tension loosened to 1-3.
t End of the zipper opening
y 2 cm (13/16˝)
u Basting
i Reverse stitches
o Seam stitches
Fabric preparation
Add 1 cm (3/8˝) to the zipper length. This is the overall
opening size.
q Right side of the fabric
w 1 cm (3/8˝)
e Opening size
r Zipper length
t End of the zipper opening
Zipper Sewing
q Stitch pattern: 00
w Thread tension dial: 1 to 4
e Presser foot: Zigzag foot A
Zipper foot E
Attaching the zipper foot
Fit the pin on zipper foot E to the groove on the foot
holder.
q Groove
w Pin
(A): To sew the left side of the zipper, attach the zipper
foot with the pin on the right-hand side.
(B): To sew the right side of the zipper, attach the zipper
foot with the pin on the left-hand side.
q
w
e
t
y
o
q
w
e
r
i
u
q
w
(A) (B)
t
To Next Page
Loading...
Need help?
General
