Janome MOD-100 - Cross Stitch; Fagoting; French Knots

47
Cross Stitch
q Stitch Pattern: 49
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
You can make cross stitch designs with these patterns, in
half the time it would take if embroidered by hand.
Use a plain close woven fabric such as linen or wool
annel. If you use light weight fabric, apply a tear away
backing for support.
Sew from the center of the design outward.
If you press the auto-lock button before sewing, the
machine will sew one unit of the cross stitch and stop
automatically.
q Auto-lock button
4
q
w
e
Fagoting
q Stitch pattern: 46
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
Use these stitches to join two pieces of fabric to create
an open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear backing 0.3–0.4 cm
(1/8˝) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After sewing is nished, tear away the paper.
q 0.3–0.4 cm (1/8˝)
w Paper
4
q
w
e
q
w
Tighten the thread tension to 5-8 when sewing.
French Knots
q Stitch pattern: 54
w Thread tension dial: 5 to 8
e Presser foot: Satin stitch foot F
q
w
e
q
* The stitch patterns 14, 42, 43 and 62 can also be used.