Janome mystyle 16 - Know What the Presser Feet will Do; Check Your Presser Foot; Change the Presser Foot

SECTION
2.
PREPARE
YOUR
MACHINE
FOR
SEWING
Know What
the
Presser
Feet Will
Do
.
Check Your
Presser
Foot
*Change
the
Presser Foot
The
Presser
feet are
an important
feature
of this
machine.
You need
to know
Use
the correct
presser
foot
for
the stitch
you
wish
to sew.
Consult
the
what
each f
oot does
in order
to use
them
effectively.
Stitch
Pattern
Chart
and the
detailed
directions
for
sewing
with
the various
Your
presser
foot
is held
in
place
by
a
Foot
Holder.
Each
presser
foot
merely
presser
feet.
snaps
on
the foot
holder,
which
is seldom
removed.
If
you need
to
remove
or attach
the
foot
holder,
here
is what
you
do.
To
Remove:
To Attach:
To Snap
Off:
Presser
bar fF
npn
I
oIf
Foot
~t
holder
>'
To
Remove:
To
Attach.
To Snap
Of f
the Presser
Foot:
Turn
the
screw
toward
the
back of
1.
Match
the
hole
in the
foot
1.
Raise
the needle
bar
to
its highest
position
by turning
the
hand
wheel
the
machine.
Use
the large
screw
holder
with
the threaded
hole
in
toward
you.
driver.
the presser bar.
2.
Raise the presser foot.
2. Fit the foot holder screw into 3.
Press the snap-on button on the back of the foot holder. The presser
the hole.
foot
will
drop
off,
3.
Tighten
the
screw
by
turning
it
toward
you.
9