Janome mystyle 16 - Set the Pressure Dial

SECTION
2.
PREPARE
YOUR
MACHINE
FOR
SEWING
Set the Pressure Dial
,Groove
Press-,
L*o irolSetn
Ii I Setiincj
'nark
The pressure control
dial is located inside the face cover plate.
Set
the dial aligning
the setting mark
on the dial with
the groove
as follows.
3 ..... .most sewing
2 ..... .applique
and Cut-Out work
1 ..... .basting, sewing chiffon,
lace, organdy and other lightweight fabrics.
Also for velours and knits (with more stretch).
NOTE: The pressure dial should be reset
at 3 after changing pressure, so
the machine is ready for most
normal sewing the next time you use
it.
5