Threading the Machine
•
Threading the needle thread
*
Raise the presser foot.
*
Press the Up/Down needle button twice to bring the
take-up lever to its highest position.
Turn OFF the power switch.
[1]Draw the end of the thread with your left hand and
hook around the upper thread guides (A) and (B)
while holding the spool with your right hand.
1. Upper thread guide (A)
2. Upper thread guide (B)
[2] Draw the end of the thread down around the
thread guide plate and draw it up.
3. Thread guide plate
[3]Firmly draw up the thread up to the take-up lever,
and down into the eye of the thread take-up lever
from the right to left.
4. Thread take-up lever
5. Eye of the thread take-up lever
[4]Slip the thread in the needle bar thread guide on
the left.
6. Needle bar thread guide
NOTE: Refer to page 13 for the automatic needle
threader.
[1]
[3]
[2]
[4]
[1]
[2]
[3]
[4]
2
3
4
5
6
1
12
To Next Page
Loading...
