Janome OC 6125 - Zipper Installation; Zipper Foot Attachment; Fabric Preparation for Zipper

9
0
Auto
1
2
3
4
5
01234
[1]
[2]
(1)
(2)
Zipper Application
Machine setting
1. Pattern #2
2. Foot E: Zipper foot
3. Thread tension Auto
4. Stitch width 0
5. Stitch length 1.5 ~ 2 (4 for basting)
To attach the zipper foot:
(1) Attach the zipper foot with the pin on the right,
when sewing on the left side of the zipper.
(2) Attach the zipper foot with the pin on the left, when
sewing on the right side of the zipper.
1. Groove
2. Pin
Fabric preparation:
[1]Add 1 cm (3/8˝) to the zipper size. This is the
overall opening size.
3. Right side of the fabric
4. 1 cm (3/8˝)
5. Opening size
6. Zipper size
7. Slider
8. Zipper teeth
9. Zipper tape
10. Wrong side of the fabric
11. End of the opening
[2]Place the right sides of the fabric together and sew
up to the end of the zipper opening, with a 2 cm
(13/16˝) seam allowance. Reverse the stitch to
fasten the seam. Baste along thezipper opening
with the stitch length 4 (0.4 cm).
12. 2 cm (13/16˝)
13. Zipper opening (Basting)
14. Reverse stitches
15. End of the opening
16. Seam
NOTE: Loosen the thread tension to one (1) for the
basting stitch.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
27