EasyManua.ls Logo

Janome OC 6125 - Sewing Speed Control; Needle Up;Down Control; Reverse Stitch Operation

Janome OC 6125
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Controlling Sewing Speed
[1] Speed control lever:
You can set the maximum speed by the speed control
lever.
To increase the speed, slide the lever to the right
(toward “ ”).
To decrease the sewing speed, slide the lever to the
left (towaed “ ”).
[2] Foot control:
Sewing speed is varied by the foot control.
The harder you depress the foot control, the faster the
machine runs.
Up/Down Needle Button
Press this button to bring the needle up or down.
The machine will stop with the needle up or down,
depending on its position before starting.
NOTE: After turning on the power, the machine
always stops with the needle up.
1. Up/Down needle button
Reverse Stitch Button
While the reverse stitch button is pressed, the ma-
chine sews backwards.
1. Reverse stitch button
[1]
[2]
1
1
6

Table of Contents

Related product manuals