9
0
Auto
1
2
3
4
5
01234
[1]
[2]
[3]
[4]
2
2
3
1
4
5
4
6
7
Blind Hem Stitch
Machine setting
1. Pattern #4
2. Foot G: Blind hem foot
3. Thread tension Auto
4. Stitch width 2 ~ 3
5. Stitch length 1 ~ 3
[1] Fold a hem with the wrong side up forming a
0.4 ~ 0.7 cm (3/16 ~ 5/16˝) allowance.
1. Wrong side of the fabric
2. 0.4 ~ 0.7 cm (3/16 ~ 5/16˝)
3. Overcasting
(1) On heavy weight fabrics that ravel, the raw
edge should be overcast first.
(2) Fold the hem under the fabric as illustrated for
fine or medium weight fabrics.
[2] Place the fabric so that the needle just pierces the
folded edge when the needle comes over the
extreme left side. Lower the presser foot.
4. Folded edge
[3] Turn the guide screw to adjust the position of the
guide to match it with the folded edge. Sew guiding
the folded edge along the guide.
5. Guide screw
6. Guide
[4] Open the fabric after sewing is finished.
NOTE: If the needle pierces too far left, the stitches
will show on the right side of fabric.
7. Right side of the fabric
31
To Next Page
Loading...
