01234
1
2
To adjust the density of the buttonhole stitch:
Adjust the stitch density within a range of .
Slide the stitch length lever toward “ 1 ” for coarser
stitches.
Slide the stitch length lever toward “ 0 ” for denser
stitches.
1. Stitch length lever
To adjust the stitch balance of the buttonhole:
If the stitches on each side are not balanced, adjust it
by the buttonhole pitch balance adjuster.
[1]Move the adjuster to the right (+), if the left side is
denser than the right side.
[2]Move the adjuster to the left (–), if the left side is
coarser than the right side.
2 Buttonhole pitch balance adjuster
25
To Next Page
Loading...
