Janome Sewing Machine - Adjusting Machine Feet

3
Adjusting the feet
Turn the adjusting screw counterclockwise (in the
direction of A) as much as possible, before placing
the machine on a surface.
q Adjusting screw
Place the machine on a flat and level surface.
Turn the adjustable foot so the four feet firmly
contact the surface.
w Adjustable foot
e Foot
Turn the adjusting screw clockwise (in the direction B)
until it contacts the surface.
NOTE:
Make sure that the machine sits on the surface
without shaking.
q
w
e
e
e
A
B