Janome Sewing Machine - RCS Unit Calibration and Machine ID

64
[19] Hoop position adjustment ON/OFF
(after starting embroidery)
The hoop position can be adjusted before
sewing each layer (section) or even in the middle
of embroidering.
NOTES:
The adjusted hoop position will apply to the
subsequent layers (sections).
Turn off this function when sewing ordinary
embroidery designs.
Press the right or left arrow button to
turn [ON] or [OFF] this function.
Press the ENTER button to register the new
setting.
If you wish to cancel the changes, press the
MODE button and LCD screen will return to the
My setting mode display without registering the
settings.
OFF
19
ON
19
mm 18
inch 18
[18] mm/inch option
You can select “millimeter” or “inch” for
measuring unit displayed on the screen.
Press the right or left arrow button to
select [mm] or [inch].
Press the ENTER button to register the new
setting or press the upward arrow button to
go to the next setting.