Janome Skyline S5 - Diagnosis Test

36
m “t5” will be shown on the LCD screen. Press u on the
touch panel.
c The key position adjustment screen appears and
“t1” is shown on the right side of the screen. With the
touch panel stylus w, press e on the touch panel of
your machine.
v “t2” will be shown on the LCD screen. Press r on the
touch panel.
b “t3” will be shown on the LCD screen. Press t on the
touch panel.
n “t4” will be shown on the LCD screen. Press y on the
touch panel.
z x
c
, The screen will be back to the
“----”
.
e
t
u
(t1)
(t2)
(t3)
(t4)
(t5)
w
q
To start the key position calibration:
If the function keys seem out of alignment, calibrate the
key position as follows.
z
While pressing the needle up/down and lock stitch
buttons, turn the power switch on.
The LCD screens display "----".
x Press the auto-lock button button q
to enter the key
position calibration.
v
b
n
m
,
y
r
Diagnosis test