Page 16
5. Installation
Warning! All connections shall be made with the power supply is turned off.
Warning! Electric shock may cause death; after power failure, there is still a
high voltage on the equipment, do not touch the live parts on the equipment.
Warning! Incorrect input voltage may damage the equipment.
Warning! This product meets the requirements of Class A equipment in EMC
requirements and is not to be connected to a residential low-voltage power
supply grid.
5.1. External interface description
Figure 5-1 Front panel view Figure 5-2 Rear panel view
a. Power switch
b. Input power cord
c. Inlet nozzle
d. Negative polarity
e. TIG welding torch gas connector
f. Positive polarity
g. 9-pin aviation socket (plus)/7-pin aviation socket (standard)
h. Wireless receiving module (optional)
To Next Page
Loading...
