Page 20
5.5. Wired handheld remote controller connection (optional)
Figure 5-6 Connection of wired handheld remote controller
Insert the aviation plug of the handheld remote controller directly into the corresponding
aviation socket of the machine.
NOTE: Please check that the machine supports wired handheld remote controller
before installation.
5.6. Installation of wireless receiver module (optional)
Figure 5-7 Pull out the plug Figure 5-8 Install the wireless receiving module
Pull out the plug as shown in Figure 5-7, and replace the wireless receiving module as shown
in Figure 5-8:
1) Remove the screws on the left cover of the machine.
To Next Page
Loading...
