Jasic TIG200 - Page 27

Page 27
disconnecting, the display window of the welder will display "FAL", and the green indicator
of the wireless receiver module will remain on.
6.1.12.2 Wired remote controller
Press the remote control key , and the remote control indicator will turn on; insert the
aviation plug of the wired remote controller into the aviation socket to adjust the welding
current through the remote controller.
6.1.12.3 Optional remote control models
Type
Name
Model
Host
receiver
module
Welding
mode
Picture
Wired
Analog torch
trigger
10K
potentiometer
Analog
welding torch
None
TIG
Digital torch
trigger
Digital
welding torch
None
TIG
Wired foot
remote controller
FRC-01(P1S
3)
None
TIG
Wired handheld
remote controller
HRC-01(P1S
1)
None
MMA
Wireless
Wireless
handheld remote
controller
HRC-02(P1S
2)
TIG/MMA
Wireless foot
remote controller
FRC-02(P1S
4)
TIG