jcb JS210 Service Manual

2 - 2
Section E
Hydraulics
9803/6400
Section E
2 - 2
Issue 2*
Torque Specification
Regulator Nm kgf m lbf ft Part No. Remarks Qty
Hexagonal socket 29 3 22 412, 413 M8 2, 2
head bolts
Hexagonal socket 12 1.20 9 436, 438 M6 2, 10
head bolts
Plug 36 3.7 27 466 PF
1
/
4
9 0.9 6 496 NPTF
1
/
16
5
Lock nut 157 16 116 630 M30 x 1.5 1
Hexagon nut 16 1.6 12 801 M8 3
All Machines (see Note on Contents Page)
This table refers to the regulator sectional drawing
Component Nm kgf m lbf ft Remarks
Rotary coupling, lock bar bolts 109-125 11.1-12.7 80-92 Apply Loctite 262
Hydraulic pump to engine bolts 65-76 6.6-7.7 48-56 Apply Loctite 262
Control valve mounting bolts 267-312 27.2-31.8 192-230
Rotary coupling bottom cover 31-37 3.2-3.8 23-27
Rotary coupling mounting bolts 103 10.5 76 Apply Loctite 242
Rotary coupling filter bolts 39 4 29
Rotary coupling motor cover 157 16 116
Rotary coupling motor make-up 78 8 58
and by-pass valve; Relief valve
Make-up and by-pass cap 137 14 101
Relief valve cap 157 16 116
Nm kgf m lbf ft Part No. Remarks Qty
Hexagonal socket 265 27 195 12 M16 x 2 12
head bolts
Set Screw 57 ±11 5.8 ±1.09 42 ±8 22 M12 x 1.75 1
Nut 5000 510 3690 21 M65 x 2 1
Boom Ram JS200 (see Note on Contents Page)
This table refers to the JS200 Boom Ram sectional drawing
Nm kgf m lbf ft Part No. Remarks Qty
Hexagonal socket 367 38 270 12 M18 x 2.5 12
head bolts
Set Screw 57 ±11 5.8 ±1.09 42 ±8 22 M12 x 1.75 1
Nut 9340 952 6885 21 M70 x 2 1
Dipper Ram JS200 (see Note on Contents Page)
This table refers to the JS200 Dipper Ram sectional drawing
*
*
*
*
*

jcb JS210 Specifications

General

Brand	jcb
Model	JS210
Category	Excavators
Language	English