Part No. 960-000193R_Rev. A © 2017 JCM American Corporation
GEN5™ Printer JCM® Training Overview September, 2017
7. Print Ticket Information (Figure 11 a).
– Verify Configuration information.
– Verify the Print quality of the Ticket Information.
– Confirm that Tickets feed through the Printer properly.
8. Check for an
Active condition in the Printer Status section (Figure 11 b). An
Active condition for a Sensor or Printer Error (e.g., Paper Low or Paper Out)
will be displayed as a
RED highlighted box (not shown). When the Active condi-
tion is cleared, the
RED highlight disappears from the Printer Status display.
Figure 11 JCM Printer Basic Driver Printer Status Section