JDS Uniphase SmartClass E1 - Specifying test settings

B
SmartClass E1 Tester Remote Control Reference Guide 37
Appendix B Actions
This appendix lists the actions that can be used in commands. Topics
discussed in this appendix include the following:
– “E1 BERT Actions” on page 37
– “E1 Pulse Shape Actions” on page 38
E1 BERT Actions
This section lists the actions that can be used in commands for the E1 BERT
application.
E1Bert.0.Auto.Auto
E1Bert.0.BertTx.ErrorInsert
E1Bert.0.BertTx.ErrorMultiInsert
E1Bert.0.BertTx.ErrorRateInsert
E1Bert.0.BertTx.SlipInsert
E1Bert.0.E1FrameTx.AlarmAisInsert
E1Bert.0.E1FrameTx.AlarmLofInsert
E1Bert.0.E1FrameTx.AlarmMFAisInsert
E1Bert.0.E1FrameTx.AlarmMFRaisInsert
E1Bert.0.E1FrameTx.AlarmRaisInsert
E1Bert.0.E1FrameTx.AlarmRebeInsert
E1Bert.0.E1FrameTx.CrcErrorInsert