JDS Uniphase SmartClass E1 - Line loopback testing

C
SmartClass E1 Tester Remote Control Reference Guide 39
Appendix C Results
This appendix lists the results that can be used in commands. Topics
discussed in this appendix include the following:
– “E1 BERT Setups” on page 39
– “E1 Pulse Shape Setups” on page 35
E1 BERT Results
This section lists the results that can be used in commands for the E1 BERT
application.
E1Bert.0.Auto.State
E1Bert.0.BertRx.BitCount
E1Bert.0.BertRx.BitErrorRate
E1Bert.0.BertRx.BitErrors
E1Bert.0.BertRx.BlockCount
E1Bert.0.BertRx.BlockErrorRate
E1Bert.0.BertRx.BlockErrors
E1Bert.0.BertRx.ErrorFreeSeconds
E1Bert.0.BertRx.ErrorFreeSecondsPercentage
E1Bert.0.BertRx.ErrorSeconds
E1Bert.0.BertRx.LssCount
E1Bert.0.BertRx.LssHistory