Fig. 23 Top Compression ring identification
1 – TOP COMPRESSION RING
Fig. 24 Second Compression Ring Identification
1 – SECOND COMPRESSION RING
2 – CHAMFER
3 – ONE DOT
Fig. 25 Compression Ring Chamfer Location
1 – TOP COMPRESSION RING
2 – SECOND COMPRESSION RING
3 – PISTON
4 – CHAMFER
Fig. 26 Compression Ring Installation
1 – COMPRESSION RING
2 – RING EXPANDER RECOMMENDED
Fig. 27 Ring Gap Orientation
1 – TOP COMPRESSION RING
2 – BOTTOM COMPRESSION RING
3 – TOP OIL CONTROL RAIL
4 – OIL RAIL SPACER
5 – BOTTOM OIL CONTROL RAIL
6 – IMAGINARY LINE PARALLEL TO PISTON PIN
7 – IMAGINARY LINE THROUGH CENTER OF PISTON SKIRT
9 - 20 2.5L ENGINE XJ
SERVICE PROCEDURES (Continued)
To Next Page
Loading...
