188 STARTING AND OPERATING
1. Unlock the fuel filler door by pushing the
unlock button on the key fob or the unlock
button on the driver-side door trim panel.
2. Open the fuel filler door by pushing on the
rear edge of the fuel door.
Fuel Door
3. There is no fuel filler cap. A flapper door
inside the pipe seals the system.
4. Insert the fuel nozzle fully into the filler pipe;
the nozzle opens and holds the flapper door
while refueling.
Fuel Filler
5. Fill the vehicle with fuel, and when the fuel
nozzle “clicks” or shuts off, the fuel tank is
full.
6. Wait 10 seconds before removing the fuel
nozzle to allow fuel to drain from nozzle.
7. Remove the fuel nozzle and close the fuel
door.
1 — AdBlue® (UREA) Filler Cap - If Equipped
2 — Fuel Filler
WARNING!
Never have any smoking materials lit in or
near the vehicle when the fuel door is open
or the tank is being filled.
Never add fuel when the engine is running.
This is in violation of most countries regula-
tions and may cause the “Malfunction Indi-
cator Light” to turn on.
A fire may result if fuel is pumped into a
portable container that is inside of a
vehicle. You could be burned. Always place
fuel containers on the ground while filling.
21_M6_OM_EN_IN_t.book Page 188
To Next Page
Loading...
