IN CASE OF EMERGENCY 301
JACK USAGE PRECAUTIONS
To complete the Use and Maintenance
Handbook to which this supplement is
attached, given below are some instructions on
the proper use of the jack.
Example Jack
Maintenance
Make sure grime does not build up on the
“worm screw.”
Keep the “worm screw” lubricated.
Never modify the jack.
WARNING!
When using the lug wrench (3), make sure it
turns freely without the risk of scraping hands
against the ground.
Even the moving parts of the jack, the “worm
screw” (1) and lug wrench adapter (2) can
cause injuries: avoid contact with them. Clean
it thoroughly if dirtied with grease.
CAUTION!
The jack is a tool designed exclusively for
changing a wheel, in case of a puncture or
damage to a tire of the vehicle on which it is fit-
ted or on vehicles of the same model. Any
other use, e.g. to jack up other vehicle models
or different things, is strictly prohibited. Never
use it to carry out maintenance or repairs
under the vehicle or to change summer/winter
wheels and vice versa. Never go under the
raised vehicle. If any work under the vehicle is
necessary, contact an authorized dealer. Incor-
rect placing of the jack can cause the vehicle
to drop: use it only in the positions indicated.
Do not use the jack for loads higher than that
specified on the label. Never start the engine
with vehicle raised. If the vehicle is raised more
than necessary, everything can become more
unstable, with the risk of the vehicle dropping
violently. Therefore raise the vehicle only as
much as necessary for the wheel/spare.
1 — Worm Screw
2 — Lug Wrench Adapter
3 — Lug Wrench
21_M6_OM_EN_IN_t.book Page 301
To Next Page
Loading...
Need help?
General
