22 GETTING TO KNOW YOUR VEHICLE
NOTE:
Customers are recommended to use a
battery obtained from Mopar®. Aftermarket
coin battery dimensions may not meet the
original OEM coin battery dimensions.
Perchlorate Material — special handling may
apply.
Do not touch the battery terminals that are
on the back housing or the printed circuit
board.
Key Fob:
1. Remove the emergency key (2) by sliding
the emergency key release (1) on the back
of the key fob and pulling the emergency
key out with your other hand.
Emergency Key Removal
2. Separate the key fob halves using a #2 flat
blade screwdriver or a coin, and gently pry
the two halves of the key fob apart. Make
sure not to damage the seal during removal.
Separating Case With A Coin
Key Fob Battery Replacement
1 — Emergency Key Release Button
2 — Emergency Key
21_M6_OM_EN_IN_t.book Page 22
To Next Page
Loading...
