Jensen CM715K User Manual

10
®
CM715K
Attach Brackets
GM
1. Note the position of brackets on the existing
radio.
2. Remove the captive bolts and brackets
from your existing radio and transfer to the
same location on your new radio.
(See Note.)
NOTE : The brackets supplied with
your Jensen radio are designed for
the following vehicles:
93-up Firebird/Camaro
94-up Bonneville
94-up Grand Prix
95-up Sunfire
96-up Grand Am
Points on clip will
lock in holes
Old Radio
Transfer brackets
to Jensen radio
Possible bracket
locations
Supplied. May be
needed for some
1993 and newer
GM vehicles.
Slide captive bolt
into opening
RESET
RESET
Untitled-3 4/10/99, 7:38 PM10

Jensen CM715K Specifications

CD Player

signal-to-noise ratio	>86 dB
frequency response	20 Hz - 20 kHz
channel separation	>65 dB

Tape Player

frequency response	±3 dB, 50 Hz-15 kHz
wow and flutter	0.13% JIS
signal-to-noise ratio (a-weighted)	65 dB

FM Tuner

tuning range	87.5 MHz-107.9 MHz
FM mono sensitivity	12 dBf
50 dB quieting sensitivity (stereo)	16 dBf

AM Tuner

tuning range	530 kHz-1720 kHz

Amplifier

total system power	160 watts peak
power output (front)	2 x 40W
power output (rear)	2 x 40W

General

power supply	11-16 VDC, negative ground
speaker output impedance	4-8 Ohms
fuses	fast blow AGC (2 amp and 10 amp)