19
MP1516
REMOTE CONTROL OPERATION
This unit comes with a full remote control system. A CR-2025 Lithium battery is
included with the remote control.
Battery Installation
In case you have to replace the batteries:
1. Remove the cover from the back of the remote control.
2. Install one CR-2025 Lithium battery.
Note: Make sure that the proper polarity (+ or -) is observed.
3. Fix the cover to the back of the remote control.
Using the Remote Control
1. Point the Remote Control at the remote control receiver on front panel of the
unit. Make sure that the signal path is not obstructed.
2. Press the function keys on the handset to control the system.
Note: The maximum distance at which signals can be received is about 6 feet.
Do not drop or throw the remote control. Do not place the remote control in a
location that is exposed to direct sunlight or next to a heating unit or other heat
source.
To Next Page
Loading...
Need help?
General
