Jensen MP1516 - Faceplate and Wiring Connections; Bracket Installation to Car; Connecting Unit to Speaker Wires; Detaching the Faceplate

12
1. Remove the hooks on both sides.
2. Align the screw holes of the mounting bracket supplied with the car and the
screw holes of the main unit. Tighten the two screws on each side of the unit.
Then fasten the brackets to the car.
3. Attach the wires of the unit to the existing speaker wires. See the wiring
diagram.
USING THE DETACHABLE FACEPLATE
Removing the Faceplate
1. Press the (release) button on the faceplate and pull o the faceplate.