Jensen VX4010 - Volume Adjustment; Audible Beep Confirmation

19
VX4010
System Settings Adjustment
To access and adjust system settings:
1.
T
ouch the Settings (
) icon on the Main Menu screen to enter the SETTINGS
MENU. Sub-menus where adjustments can be made will be highlighted. (See
”SYSTEM SETTINGS” on page 23.)
Volume Adjustment
To increase or decrease the volume level, rotate the front panel Rotary
Volume ( ) knob / Mute button. The unit’s front panel screen will display the
volume level for 3 seconds. The volume level ranges from 0 to 50 (a beep sounds,
indicating that the adjustment limit has been reached).
Bluetooth volume can be adjusted independently of the radio volume by rotating
the Rotary Volume (
) knob / Mute button. Bluetooth must be in a call when
making the volume adjustment. When exiting Bluetooth the volume will return to
the previous source volume level.
Audible Beep Conrmation
An audible beep tone conrms each function selection. The beep tone can be
disabled through the Setup menu.
Muting the Audio
Press the front panel Rotary Volume ( ) knob / Mute button to mute the audio
from the unit. Mute icon is displayed on the LCD screen. Press the Rotary
Volume ( ) knob / Mute button again to restore the audio volume to its
previous level. Adjusting the volume or using any of the audio setup features
cancels the mute function.
Equalizer Controls
Equalizer (EQ): Adjustment can be made after entering one of the audio/video
sources (Disc, Radio, USB, AV-IN or SDHC).
Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a
desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop), Flat setting,
custom User setting, make adjustments to the audio Balance and Fade levels or to
turn the Loudness option ON or OFF. Touch the SRC icon to return to the current
source. (See ”Adjusting Equalizer Controls” on page 21.)