Jensen VX7020A - Navigation View

Changing 2D,
3D, or 2D North
up views
, ,
Switch between the 3D p
erspective, 2D Heading up, and 2D
North up map view modes. In Heading up mode the map is
rotated so its top always points in the current driving direction.
This is the default orientation in 3D map view mode. In North up
mode, the map faces North.
Checking the
compass
The di
rection of the compass shows North.
Returning to
normal
navigation
Move the map back to follow the current GPS position. Automatic
map rotation is also re-enabled.
The map manipulation buttons disappear and the navigation
continues.
Selecting
additional
options
Open a list of additional features like saving a location, or
searching for Places around the cursor.
Selecting a
destination
Select the cursor location as a new destination. The route is
automatically calculated.
2.3 Navigation view
The navigation view is the main screen of the VX7020A that shows the planned route on a map. The
VX7020A works with digital maps which are not simply the computerized versions of traditional paper
maps. Similarly to paper road maps, the 2D mode of digital maps shows you streets and roads.
Elevation is also illustrated in color.
The
navigation view displays the following screen buttons, data fields, and route information on the map
during navigation:
Note!
Some buttons, fields, or icons may not be available in your product version.
12