5. Chec
k the settings for road types and change them if necessary.
Tap
to enable or avoid freeways, tap for roads with Period Charge or Per-use Toll, tap
for ferries, or tap for carpool lanes.
6. Tap
to confirm the destination. You can also select a nearby point on the map
or tap
to select a different destination.
7. The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap
to modify the route parameters, or tap
to start your journey.
3.1.8 Selecting a location on the map
To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
48
To Next Page
Loading...
