3.1.7 Entering coordinates
To select a destination by entering its coordinates, perform the following steps:
1. Tap
on the Navigation view to access the Navigation menu.
2. Tap
and .
3. You can enter the latitude and longitude values in any of the following formats: decimal degrees,
degrees and decimal minutes, or degrees, minutes and decimal seconds. Tap
.
Tip!
(optional) If necessary, tap
then and enter the coordinate in UTM
4. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The cursor (
) appears at the new location.
47
To Next Page
Loading...
