EasyManua.ls Logo

Jensen VX7020A - Troubleshooting; GPS Signal Cannot Be Received; Address Cannot Be Found

Jensen VX7020A
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Troubleshooting
This section offers possible solutions to issues that may occur during the operation of the VX7020A.
5.1 GPS signal cannot be received
Issue: The current location is not available, because GPS signal cannot be received.
Cause 1
: GPS signal is weak or may not be available if you are between tall buildings, in garages or
tunnels as the signal weakens or distorts as it travels through solid material.
Solution 1: Go to a place where there is a clear sight of the sky or at least a bigger part of the sky is
visible.
Cause 2: It may take several minutes to receive GPS signals when first using the VX7020A, or when
your
last known position is farther away from your current position.
Solution 2: Wait a few minutes for the GPS signal.
5.2 Address cannot be found
Issue: The VX7020A cannot find the address you entered.
Cau
se: The digital map data may not include every single address.
Solution 1: If the house number is not known or the VX7020A cannot find it, select only the street name.
This way, the VX7020A will navigate you to the midpoint of the street, where you can find the exact
address more easily.
Sol
ution 2: Search for another address that is close to the destination.
Solution 3: Search for the coordinates or a nearby Place of Interest.
86

Table of Contents

Other manuals for Jensen VX7020A

Related product manuals