EN - 1 BA-0006 • 2020-02-08
SynMag 2600/3100/3600/4100/5100
1 Identification EN-3
1.1 Marking EN-3
2 Safety EN-3
2.1 Designated use EN-3
2.2 Responsibilities of the user EN-3
2.3 Personal protective equipment EN-3
2.4 Classification of the warnings EN-3
2.5 Product safety EN-4
2.6 Warning and information signs EN-4
2.7 Emergency information EN-4
2.8 Disposal of the machine EN-4
3 Product description EN-5
3.1 Technical data EN-5
3.2 Ambient conditions EN-7
3.3 Nameplate EN-7
3.4 Signs and symbols used EN-9
4 Scope of delivery EN-9
4.1 Transport EN-9
4.2 Storage EN-9
5 Functional description EN-10
6 Putting into operation EN-12
6.1 Water cooling EN-13
6.2 Preparing the wire feeder EN-13
6.3 Preparing for welding EN-13
6.4 Mains port EN-14
6.5 Welding EN-14
7Operation EN-15
7.1 Control elements EN-15
7.2 Operation EN-16
7.2.1 Setting the programme number EN-16
7.2.2 Setting the material thickness EN-16
7.2.3 Operating modes EN-16
8 Welding programmes EN-17
8.1 SynMag 2600 EN-17
8.2 SynMag 3100 EN-17
8.3 SynMag 3600 EN-18
8.3.1 Wire feed in the torch cable assembly EN-19
9 Maintenance and cleaning EN-19
10 Troubleshooting EN-20
11 Appendix EN-21
11.1 SynMag 2600/3100 spare parts EN-21
11.2 SynMag 3600/4100/5100 spare parts EN-23
11.3 DVK 5100 spare parts EN-25
11.4 Circuit diagram EN-26
11.4.1 SynMag 2600 circuit diagram EN-26
11.4.2 SynMag 3100 circuit diagram EN-29
11.4.3 SynMag 3600 circuit diagram EN-32
11.4.4 SynMag 4100 circuit diagram EN-36
11.4.5 SynMag 5100 circuit diagram EN-40
11.4.6 DVK 5100 circuit diagram EN-44
Translation of the original operating instructions
The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these operating
instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such changes will, however,
be incorporated into subsequent editions of the operating instructions. All brand names and trademarks that appear in these operating
instructions are the property of their respective owners/manufacturers. The contact details for Jäckle & Ess System GmbH
national subsidiaries and partners worldwide are provided on our website at www.jaeckleess.com.
To Next Page
Loading...