Need help?Do you have a question about the Jet JTM-1254VS and is the answer not in the manual?
General| Swing Over Bed | 12 in |
|---|---|
| Distance Between Centers | 54 inches |
| Spindle Bore | 1.5 inches |
| Motor | 1 HP |
| Quill Travel | 5 inches |
| Head Tilt | 45° |
| Voltage | 115/230V |
Lists all parts included in the shipping container for the turret mill.
Step-by-step instructions for unpacking and preparing the mill.
Safety guidelines and requirements for electrical connections.
Exploded view and parts list for the upper head assembly.
Exploded view and parts list for the lower head assembly.
Exploded view and parts list for the base machine.
To Next Page
