Jet JWS-18HO - Unpacking and Cleanup; Tools Required for Assembly; Contents of Shipping Carton

l]NPACKING AND CLEANUP
1. Finish removing all contents from the
shipping container.
2. Inspect contents for shipping damage and
report any damage to your distributor,
3. Clean all protected parts with kerosene. Do
not use gasoline, paint thinner, or any
cellulose-based solvent. These will damage
painted surfaces and melt plastic.
TOOLS REQUIRED FOR ASSEMBLY
Adjustable wrench or combination wrench set
#2 flat blade screw driver
#2 cross point screw driver
Ratchet wrench and sockets will speed assembly
but are not required.
CONTENTS OF SHIPPING CARTON:
I - Motor
1 - Table Assembly
1 - Fence Assembly
4 - Stand Legs
4 - Stand Braces
3 - Stand Top
1 - 1/2" Spindle Assembly
1 - 3/4" Spindle Assembly
1 - Wrench
I - 1/4" Collet
1 - 1/2" Collet
1 - Dust Chute
2 - Guide Pins
1 - Miter Gauge
1 - Belt Cover
1 - Bag of Assembly Hardware