EasyManua.ls Logo

JETSURF ADVENTURE DFI PLUS - Maintenance; Surface and Engine Maintenance

JETSURF ADVENTURE DFI PLUS
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
DFI003/EN_part A
6A MAINTENANCE
Although JetSurf™ manufacturer uses the highest quality materials available for production of the mo-
torized power board, the user has to perform regular maintenance which will ensure long-term life and
high gloss for which it was so sought after when purchased. Failure to observe these instructions may
result in the premature damage to the motorized power board which is not covered by the guarantee.
Always perform due maintenance of your motorized power board and be aware that its condition
may deteriorate with time and as a result of demanding operation or bad handling.
A basic precondition of good maintenance is observing of procedures described in the chapters
“AFTER THE RIDE” on page 36/part A and in the chapter “LONG-TERM STORAGE” on page 40/part A.
SURFACE MAINTENANCE
Maintaining a top layer of quality wax on the surface of the motorised power board is crucial for
keeping of the original high gloss surface for years to come. Use only high quality wax, such as car-
nauba wax. Failure to protect this top layer can make the guarantee void.
MAINTENANCE OF TECHNICAL EQUIPMENT
Check the technical equipment of the engine compartment regularly in order to prevent bigger dam-
age to the power board. If any damage occurs on any part of the power board or if you are not sure
whether your power board is in order, please contact your authorised JetSurf™ Authorized Dealer.
ENGINE MAINTENANCE
Before and after every ride always grease all the engine parts with the MOTOREX INTACT MX 50 spray. If
you do not use your JetSurf for a long time, follow the instructions specied in the chapter LONG-TERM
STORAGE, 40/part A. Once in every 12 months we recommend performing a complete service inspection.
MAINTENANCE OF SPARK PLUG
The spark plug must be checked before every ride and for a trouble-free power board operation it
must be replaced after 6 hours of operation.
Use only the spark plug specied in this manual NGK BPR 7HS. These spark plugs can be purchased
online or in shops selling car parts.
Using any other type of a spark plug may result in the engine damage and
will make the guarantee void. Although some companies may claim that
they have an equivalent spark plug, JetSurf ™ strongly recommends the cus-
tomers to use only spark plugs of NGK brand. Using any spark plugs other
than NGK may lead to the engine damage and will make the guarantee void.
When installing a new spark plug, tighten it with a spanner according to
the instructions on the spark plug packaging.
After removing the boot from the spark plug, NEVER start the engine in a
standard way. If the engine is started without having the boot mounted
on the spark plug screwed in the engine, it may result in damaging of the
ignition control unit (ICU).
MAINTENANCE
NOTICE
WARNING

Table of Contents

Related product manuals