JETSURF ADVENTURE DFI PLUS - Page 55

55
DFI003/EN_part A
TROUBLESHOOTING
1/4 of a turn. WHEN TIGHTENING THE SPARK
PLUG, FOLLOW THE INSTRUCTIONS FROM
THE SPARK PLUG MANUFACTURER!
13) Place the boot on the spark plug. The boot is
mounted correctly when the spark plug insulator
is covered completely with the boot.
7) Place the boot holder on the spark plug boot.
WARNING: When the boot has been removed
from the spark plug, NEVER START THE ENGINE
– if the engine is started without the spark plug
boot on, the control unit will be destroyed.
If the ICU is on (the indicator is lit or
ashing),
SITUATION MUST NOT OCCUR!!!
WRONG!!!